diff --git a/INSTALL b/INSTALL
index 62ea076c1f700124838ce1e6f91bbe3e8945c6c5..54caf7c190f28df0279ade5fee3d43b108480a14 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,5 +1,5 @@
-Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
-Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
@@ -71,8 +71,9 @@ Compilers and Options
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
- You can give `configure' initial values for variables by setting
-them in the environment. You can do that on the command line like this:
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
@@ -137,9 +138,10 @@ Specifying the System Type
==========================
There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it cannot guess the host type, give it the
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -151,20 +153,16 @@ where SYSTEM can have one of these forms:
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the host
-platform (i.e., that on which the generated programs will eventually be
-run) with `--host=TYPE'. In this case, you should also specify the
-build platform with `--build=TYPE', because, in this case, it may not
-be possible to guess the build platform (it sometimes involves
-compiling and running simple test programs, and this can't be done if
-the compiler is a cross compiler).
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
diff --git a/README b/README
index 3ca6694630d86e770357ec766d8baa2d560afa95..5e357136852a7292042ba04b3222d485a963fa22 100644
--- a/README
+++ b/README
@@ -8,7 +8,7 @@ Contents
I. Introduction
II. External Packages (both required and optional packages)
III. Configure Options
-
+IV. Compiler flags
I) Introduction
===============
@@ -300,8 +300,8 @@ The following quotes the online-help obtained by running "configure
(default: PREFIX/include/)
-4.) CFLAGS and FFLAGS settings
-------------------------------
+IV. Compiler flags settings
+===========================
The default flags for the optimised libraries are "-O3" when using gcc
and "-O" otherwise.
@@ -310,16 +310,36 @@ The default flags for the debugging-enabled libraries are
"-O0 -ggdb -fno-inline -fno-builtin" with gcc and "-g" otherwise.
You are strongly encouraged to change this. To do so, you can set the
-environment variables CFLAGS, FFLAGS and ALBERTA_DEBUG_CFLAGS before
-you run configure. You can also set these variables on the
-command-line of the make program, e.g. with a recent gcc on a Pentium
-4 you could use
+environment variables
+
+ALBERTA_OPTIMISE_CFLAGS
+ALBERTA_DEBUG_CFLAGS
+FFLAGS
+
+before you run configure. You can also set these variables on the
+command-line of the configure or the make program, e.g. with a recent
+gcc on a Pentium 4 you could use
+
+configure ALBERTA_OPTIMISE_CFLAGS="-O3 -march=pentium4 -mfpmath=sse"
+
+or (later, when building the libraries)
-make CFLAGS="-O3 -march=pentium4 -mfpmath=sse"
+make ALBERTA_OPTIMISE_CFLAGS="-O3 -march=pentium4 -mfpmath=sse"
You have to consult the documentation for the compiler(s) you are using
to determine the appropriate switches for your setup.
+NOTE: if you use the CFLAGS-variable, then it's value will be appended
+to the compiler flags at built-time. So using e.g.
+
+make CFLAGS="-O3 -funroll-all-loops -g0" ALBERT_DEBUG_CFLAGS="-ggdb"
+
+will result in '-ggdb -O3 -funroll-all-loops -g0' for the
+debug-enabled libraries which is probably not what you want.
+
+You still can use CFLAGS to set compiler flags used for both,
+optimising and debug-enabled objects.
+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLEASE LEAVE HERE FOR ISPELL:
diff --git a/depcomp b/depcomp
index 368e3be93e0b80b87f428763574b9d099bd38bfd..51606f8c4632e402516abd7afb1071a2c3b18a99 100755
--- a/depcomp
+++ b/depcomp
@@ -206,19 +206,53 @@ aix)
rm -f "$tmpdepfile"
;;
+icc)
+ # Must come before tru64.
+
+ # Intel's C compiler understands `-MD -MF file'. However
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
tru64)
- # The Tru64 AIX compiler uses -MD to generate dependencies as a side
+ # The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- base=`echo "$object" | sed -e 's/\.o$/.d/' -e 's/\.lo$/.d/'`
- tmpdepfile1="$base.o.d"
- tmpdepfile2="$base.d"
if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
"$@" -MD
fi
@@ -250,34 +284,42 @@ tru64)
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- test -z "$dashmflag" && dashmflag=-M
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*) # this is libtool, let us make it quiet
- for arg
- do # cycle over the arguments
- case "$arg" in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
@@ -295,33 +337,37 @@ dashXmstdout)
;;
makedepend)
- # X makedepend
- (
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in no)
- set ""; shift
- cleared=yes
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift;;
- esac
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
@@ -334,35 +380,39 @@ makedepend)
cpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
+ # always write the proprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
;;
esac
- "$@" -E |
+ done
+
+ "$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -374,47 +424,25 @@ msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
- *)
+ *)
set fnord "$@" "$arg"
shift
shift
;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
diff --git a/install-sh b/install-sh
index 398a88e1421823561abbf2d48ca8f263babc04d9..0ec27bcd488da5cad6ead13d70accbdbc40d31ef 100755
--- a/install-sh
+++ b/install-sh
@@ -1,19 +1,37 @@
#!/bin/sh
#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
@@ -56,7 +74,7 @@ dir_arg=""
while [ x"$1" != x ]; do
case $1 in
- -c) instcmd="$cpprog"
+ -c) instcmd=$cpprog
shift
continue;;
@@ -79,7 +97,7 @@ while [ x"$1" != x ]; do
shift
continue;;
- -s) stripcmd="$stripprog"
+ -s) stripcmd=$stripprog
shift
continue;;
@@ -106,7 +124,7 @@ done
if [ x"$src" = x ]
then
- echo "install: no input file specified"
+ echo "$0: no input file specified" >&2
exit 1
else
:
@@ -115,8 +133,8 @@ fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
-
- if [ -d $dst ]; then
+
+ if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
@@ -125,20 +143,20 @@ if [ x"$dir_arg" != x ]; then
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
+# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
- if [ -f $src -o -d $src ]
+ if [ -f "$src" ] || [ -d "$src" ]
then
:
else
- echo "install: $src does not exist"
+ echo "$0: $src does not exist" >&2
exit 1
fi
-
+
if [ x"$dst" = x ]
then
- echo "install: no destination specified"
+ echo "$0: no destination specified" >&2
exit 1
else
:
@@ -147,16 +165,16 @@ else
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
- if [ -d $dst ]
+ if [ -d "$dst" ]
then
- dst="$dst"/`basename $src`
+ dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
@@ -165,69 +183,73 @@ dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
-IFS="${IFS-${defaultIFS}}"
+IFS="${IFS-$defaultIFS}"
-oIFS="${IFS}"
+oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
+ pathcomp=$pathcomp$1
shift
- if [ ! -d "${pathcomp}" ] ;
+ if [ ! -d "$pathcomp" ] ;
then
- $mkdirprog "${pathcomp}"
+ $mkdirprog "$pathcomp"
else
:
fi
- pathcomp="${pathcomp}/"
+ pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
- $doit $instcmd $dst &&
+ $doit $instcmd "$dst" &&
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
- if [ x"$transformarg" = x ]
+ if [ x"$transformarg" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
- dstfile=`basename $dst $transformbasename |
+ dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
- if [ x"$dstfile" = x ]
+ if [ x"$dstfile" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
:
fi
-# Make a temp file name in the proper directory.
+# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/#inst.$$#
+ rmtmp=$dstdir/#rm.$$#
-# Move or copy the file name to the temp name
+# Trap to clean up temp files at exit.
- $doit $instcmd $src $dsttmp &&
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
- trap "rm -f ${dsttmp}" 0 &&
+# Move or copy the file name to the temp name
+
+ $doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
@@ -235,17 +257,38 @@ else
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+} &&
# Now rename the file to the real destination.
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
+# The final little trick to "correctly" pass the exit status to the exit trap.
-exit 0
+{
+ (exit 0); exit
+}
diff --git a/missing b/missing
index dd583709f535918128e0f8d3b6a4fddf64c87cec..6a37006e8f0a69ddbf5b383c882beb60cbe04d12 100755
--- a/missing
+++ b/missing
@@ -1,6 +1,6 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -293,23 +293,23 @@ WARNING: \`$1' is missing on your system. You should only need it if
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
- gnutar ${1+"$@"} && exit 0
+ gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
- gtar ${1+"$@"} && exit 0
+ gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" ${1+"$@"} && exit 0
+ tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" ${1+"$@"} && exit 0
+ tar "$firstarg" "$@" && exit 0
;;
esac
fi
diff --git a/mkinstalldirs b/mkinstalldirs
index 867ac21b4360f362388d0a980ee922c9e9929e9b..d2d5f21b611235316317197d3a32c2dff5897a6f 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -4,8 +4,6 @@
# Created: 1993-05-16
# Public domain
-# $Id: mkinstalldirs,v 1.3 2002/07/05 09:54:38 dani Exp $
-
errstatus=0
dirmode=""
@@ -14,18 +12,29 @@ Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
- case "${1}" in
- -h | --help | --h* ) # -h for help
- echo "${usage}" 1>&2; exit 0 ;;
- -m ) # -m PERM arg
- shift
- test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
- dirmode="${1}"
- shift ;;
- -- ) shift; break ;; # stop option processing
- -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
- * ) break ;; # first non-opt arg
- esac
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
done
for file
@@ -38,64 +47,65 @@ do
done
case $# in
-0) exit 0 ;;
+ 0) exit 0 ;;
esac
case $dirmode in
-'')
- if mkdir -p -- . 2>/dev/null; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- fi ;;
-*)
- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- fi ;;
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
esac
for file
do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
-
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
done
exit $errstatus
# Local Variables:
# mode: shell-script
-# sh-indentation: 3
+# sh-indentation: 2
# End:
# mkinstalldirs ends here